AUTONET TV

Easy on the Wheel (Power Steering)

Steering a vehicle these days doesn't take much effort, but if you got behind the wheel back before power steering was invented, you'd need to practically have the strength of Hercules to turn the wheel.   

The first power steering systems widely available changed everything.  Chrysler introduced its Hydraguide power system in 1951. The "hydra" was for a hydraulic pump. It pressurized fluid that multiplied the force applied to the steering wheel so it was easier to turn the wheels on the ground. That pump got power from a belt attached to the engine, but unfortunately it wasted a lot of energy in the process. Plus, the system of hoses and pumps required a fair amount of maintenance and repair. Some say this system provides the most "natural" steering experience of power systems.

Recently, automakers have turned to electric power steering.  It gets its power from the car's electrical battery and charging system and uses an electric motor to turn the wheels.  Since it's not powered by the mechanical energy of your vehicle's engine, electric power steering increases fuel economy.  Electric power steering also doesn't require hoses and fluids, meaning there are fewer things that can go wrong.  That means less maintenance. 

There's a third system that combines both of the others, called electro-hydraulic power steering. In this system, the hydraulic power steering pump is powered by an electric motor and, some say, gives the driver that more natural feel of hydraulic systems.  

Because steering is so important for the safe operation of any vehicle, it's essential to make sure yours is working the way it should. Different types of systems require different kinds of upkeep. Regular, scheduled maintenance according to the manufacturer's recommendations should help keep your steering in top shape so you can avoid any sudden steering failures.  Bring your vehicle to us so a technician can inspect your steering system.  And, of course, if you notice any steering problems, make an appointment right away to have those issues looked at.  Now that's one stop that makes sense!

McLearen Shell
3043 Centreville Road
Herndon, VA 20171
(703) 318-7744
http://www.mclearenshell.com

Keeping Yourself in Suspension (Control Arm Assembly Replacement)

When you are pointing your vehicle straight down the street, it should go straight.  That’s pretty straightforward, right? Sometimes, though, you may notice you have to keep adjusting the steering wheel to keep going straight.  While that could be caused by many different issues, one possibility is that you have a failing or bent control arm.

Another sign is that when you brake, your vehicle pulls to one side or the other.  Sometimes your suspension may sound noisy, especially when you’re traveling on rough surfaces.  A damaged control arm may also make it almost impossible for you to get a good wheel alignment. 

The control arms are part of your suspension, and some vehicles have upper control arms and lower control arms.  Not all have the same number of control arms, but one thing is important: If you have worn bushings on your control arms or a worn-out ball joint, the control arm on the other side should also be replaced.  The rubber bushings are susceptible to damage from age and exposure to the elements, and ball joints usually shouldn’t be replaced separately. 

Any time you have a suspension issue, it’s important that a technician inspects the other parts of your suspension as well.  If one part of it is showing its age, it’s not unusual for other components to show similar wear.  

One other thing.  If you’ve had one of your control arms bent or damaged in an accident, you must have it replaced.  Your suspension is an important part of your vehicle’s safety and handling, so you should keep it in good operating condition.  After all, your life is riding on it, literally.   

McLearen Shell
3043 Centreville Road
Herndon, VA 20171
(703) 318-7744
http://www.mclearenshell.com

Smooth Operator (Shocks and Struts)

Few of us ever drive somewhere without encountering some pretty rough roads, and it's amazing how well our vehicles are able to smooth out the ride. Thank your shocks and struts.

The two parts are similar.  Some cars have shocks in the rear, and struts in the front.  Others have struts all around.  A shock absorber uses a cylinder filled with gas or liquid that's connected to your vehicle's frame and axle.  When your vehicle encounters an imperfection in the road, the shock dampens the motion. 

A strut is essentially a shock absorber mounted inside a spring and can support more weight than a shock by itself.

Shocks and struts take a lot of punishment and wear out.  When they do, your tires are not contacting the road as much as they should, and that can result in a bumpy, unstable ride. Worn-out shocks and struts also transfer the impacts of road imperfections directly to your vehicle's body which can cause further damage to other parts.

You can tell when your shocks and struts are wearing out when your vehicle's ride is bouncy, you feel the bumps and body motion a lot more than you used to, or you may see fluid leaking from the areas near the wheels.

How often your shocks and struts need replacing depends on what surfaces you drive on, how far they've traveled, and how long they've been on the vehicle.  Our technicians can check the condition of your shocks and struts and advise you when they need to be changed.  Shocks and struts should always be changed in pairs.  

Because shocks and struts wear out gradually over a long time and distance, experts recommend you have them checked at least once a year.  Plus, if you know you've recently hit something especially hard in the road, you should have your suspension checked just to make sure it's ok.

McLearen Shell
3043 Centreville Road
Herndon, VA 20171
(703) 318-7744
http://www.mclearenshell.com

When Metal Meets Metal (Wheel Bearings)

What part of your vehicle has little metal balls inside that are lubricated and allow you to cruise on down the road?  They are wheel bearings, and automotive designers might argue they are human beings' second greatest invention of all time (the first is, of course, the wheel!).

You have a wheel bearing at each wheel.  They allow your wheels to turn freely, minimizing friction that would ordinarily slow you down when metal meets metal.  When one of your wheel bearings starts to go bad, it lets you know. A wheel bearing does its work quietly when it's in good health but starts getting noisy when it isn't.  People describe the noise differently.  Sometimes it sounds like road noise, a pulsating, rhythmic, sound.  That pulse speeds up when your vehicle speeds up. 

Here's what's happening when you hear that sound.  As mentioned, the bearing has these little metal balls inside a ring.  They have a lubricant inside to reduce friction between the balls; modern wheel bearings are sealed and they're intended to do their job without any maintenance. 

Wheel bearings take a beating; you hit some rough potholes or go over some uneven railroad tracks. Sometimes water can get into a bearing and reduce the ability of the lubricant to do its job.  Time starts to take its toll, too. When the lubricant isn't reducing friction like it should, the bearing can heat up. One of those little balls can start shedding pieces of metal and soon those shards start grinding up the other balls.  Friction takes over and soon your wheel isn't turning smoothly. That's what's causing the sound.  If a wheel bearing is not fixed, it could eventually seize up completely, and you can be stranded.

It's a lot easier if you heed the early warning signals, that pulsating noise.  Now, sometimes a similar noise can be caused by a bad tire, but in either case, it's important to have it checked out. Our McLearen Shell technicians will be able to tell you fairly quickly what the problem is and offer a solution.

Wheel bearings generally don't fail often and usually last from 85,000-100,000 miles/140,000km to 160,000km. But consider them a long-term maintenance item that, once fixed, will keep you heading smoothly to the next destination.

McLearen Shell
3043 Centreville Road
Herndon, VA 20171
(703) 318-7744
http://www.mclearenshell.com